Repairs and sanding take place following a typical one to two-day drying period. Repairs of sunken pavers, low spots, and incorrectly pitched areas will be addressed at this time. Following the repairs, the installation of HP polymeric sands will fill the joints. We use Techniseal HP Nexgel polymeric sand in all of our work. We use the best products to complete your job. Our installation process includes vibratory plate compaction. This process increases the sand’s strength by approximately 12% and decreases water absorption by up to 60%. Water is the worst enemy of your pavers and your paver application. Your patio, walkway, driveway, or pool area will be virtually weed-free after we replace your sands.

Polymeric sands need at least a week to cure. After this curing period, we return to a dry surface and apply a light acid cleaning and power washer rinse to remove any polymeric sand hazing and prep the pavers for the final step, the sealing.

Following the acid clean, we typically return the next day to seal the pavers and finish rejuvenating your project. At this time we will spot-treat any areas that need some additional polymeric sand. We also remove bird droppings, worms, or any other organic or inorganic material on the surface. Our sealers are heavily sprayed on and then backrolled. Our clients have a choice of two film-forming sealers. Clear Look provides a natural look finish with strong protective properties. WeBuild HomeEffiecient provides a deep rich color enhancing appearance with a satin finish. It too provides strong protection properties. Depending on weather conditions, you can typically expect up to 3 years of protection from either sealer.